Plastic Chain

Available Material: PP,PE,LDPE,HDPE

Plastic Chain is versatile enough to be used for both indoor and outdoor use. Perfect for use in gardens and planters. Another useful features is using it to identify dangerous areas.

• Used for garden borders, marking perimeters, directing crowds or lines and identifying dangerous areas
• For interior and exterior use
• Light-duty plasxtic construction​

Available Finishes:This item is available in Yellow,Green,Blue,Red,Black,White, Red-white, Yellow-Black etc.

Packing Options: Bags,Cartons,reels,Pails,Durms,Clamsheel,Plastic card,Pallet box

​

WARNING:Chain and accessories shown are not to be used for overhead lifting or for hoisting applications. Do NOT exceed working load limits.

Category: Weldless Chain

Tags: Hardware chain, Plastic Chain, Chain plastic,plastic chain electric,General plastic chain. Plastic chain rope, Black plastic chain.White plastic chain.Plastic safrty chain. Plastic roller chain.  Plastic chain home depot. Plastic chain Acehardware, Plastic chain Apex. Plastic chain Burnings. Plastic chain Lowes.

WORKING LOAD LIMITS:The maximum load (in pounds) which should never be applied to chain, even when the chain is new and the load is uniformly applied in direct tension to a straight, untwisted length of chain. The term “working load limit” contains no implication of what load the chain will withstand if any of the above factors are changed. Any chain can be subject to wear, twisting, misuse, overloading, intentional alteration and corrosion. These and other usage variables may cause a reduction in their working load limits. It is, therefore, important to regularly inspect all products to determine that they are safe for continued use.

Minimum Breaking Force: The "Minimum Breaking Force" is the minumum force at which the chain during manufacture has been found by testing to break when a constantly increasing force is applied in direct tension. Breaking force values are not guarantees that all chain segments will endure these loads. This test is a manufacturer's attribute acceptance test and shall not be used as a criterion for service or design purposes.

Overload:  Any static or dynamic load in excess of "Working Load Limit"

Proof Test:The load (in pounds) to which the chain was subjected, in the as-manufactured condition prior to the time it left the factory. Under this test, a load has been applied in direct tension to a straight length of chain with a uniform rate of speed on a standard chain testing machine. The sole purpose of this test is to discover defects in the material or manufacturing process.

Geberal Warnning:Low and high carbon steel, weldless and welded chain, and accessories made from assorted metals are intended to be used in tension or pull applications and are not to be used for lifting or hoisting purposes or when their failure is likely to cause damage to property or persons. Jerking or acceleration in the rate of application of a load multiplies the stress on the chain very rapidly and should be avoided.